Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 163)

163
Scanning
You can scan your originals and save them as digital files.
Note: Your product may differ from the images in this guide, but the instructions are the same unless
otherwise noted.
Starting a Scan
Starting a Scan
After placing your originals on your product for scanning, start scanning using one of these methods.
Starting a Scan Using the Product Control Panel
Setting Up and Scanning to a Network Folder or FTP Server
Starting a Scan Using the Epson Scan 2 Icon
Starting a Scan from a Scanning Program
Starting a Scan from a Smart Device
Scanning a Document in Epson ScanSmart
Selecting Epson ScanSmart Settings
Scanning in Epson Scan 2
Parent topic: Scanning
Starting a Scan Using the Product Control Panel
You can scan an image to a variety of destinations using your product's control panel.
1. Make sure you installed the product software and connected the product to your computer or
network.
Note: Restart your computer after installing the product software to enable scanning from the control
panel.
2. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place your originals in the ADF.
3. Press the home button, if necessary.