Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer User Manual

Page 58

Select your product from the list.

Note:

If your product is not listed, move closer to the product and try again. If the product is still not

shown, connect your printer to the wireless network using the control panel and then select

Connect

to Existing Product

in the Epson Smart Panel app and follow the on-screen instructions. See the

link below for wireless setup instructions.

Select

Next

to select the current wireless network.

Note:

If you want to connect the product to a different wireless network, select

Change another Wi-

Fi SSID

Enter the password for the wireless network and select

The app starts configuring the product.

Note:

Do not move the smart device away from the product during configuration. The product's

control panel may show a successful wireless connection before the process is completed on your
device. Wait for the completion message in the Epson Smart Panel app and do not cancel the
configuration before it is completed.

Your product is now connected to a wireless network and set up for use with the Epson Smart Panel
app.

Parent topic:

Wi-Fi Infrastructure Mode Setup

This manual is related to the following products:

WorkForce Pro WF-7840 All-in-One Inkjet Printer EcoTank Pro ET-5880 All-in-One Cartridge-Free Supertank Printer with PCL Support EcoTank Pro ET-16600 Wide-Format All-in-One Supertank Printer Workforce ST-C8090 All-in-One Supertank Printer