Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 312)

312
Checking for Software Updates
Connecting a Telephone or Answering Machine
Using AirPrint
Creating a Shared Network Folder
Accessing the Web Config Utility
Related topics
Solving Paper Problems
Wi-Fi or Wired Networking
Status Menu Error Codes
If a job does not complete successfully, you can check the error code. Press the Job/Status button to
locate the incomplete job. Select the job to display the error code and additional information.
Code Condition/solution
001 The product was turned off by a power failure.
106 Cannot print from the computer due to the access control settings.
107 User authentication failed. The job has been canceled.
108 Confidential job data was deleted when the printer was turned off.
109 The received fax was already deleted.
110 The job was printed 1-sided because the loaded paper does not support 2-sided printing.
201 The product's memory is full.
You can send pages individually or print received faxes and then delete them to free up
memory space.
202 The line was disconnected by the recipient's fax machine. Wait a moment, then try again.
203 The product cannot detect a dial tone.
Make sure the phone cable is connected correctly and the phone line works. If you
connected the product to a PBX (Private Branch Exchange) phone line or Terminal
Adapter, turn off the
Dial Tone Detection setting.
204 The recipient's fax machine is busy. Wait a moment, then try again.
205 The recipient's fax machine does not answer. Wait a moment, then try again.