Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 99)

6. Menu Display and Settings 99
Technical Menu
This section describes the function and settings of each menu item.
Factory default settings are shown in bold (for example,
18dB ).
Technical >Color Bars
Sets color bar settings.
Item Sub-item setting Description
Setting On / Off Turns the color bars on/off.
Type ARIB / 100% / 75% / SMPTE Selects the color bar type.
Technical >Test Saw
Sets test signal settings.
Item Sub-item setting Description
Test Saw On / Off Turns the test signal on/off.
Technical >ND Dial
Sets settings related to ND VARIABLE dial operations.
Item Sub-item setting Description
CLEAR with
Dial On / Off Sets whether to enable ND status
switching (CLEAR
 On) by ND
VARIABLE dial operation.
Technical >Tally
Sets recording/tally lamp settings.
Item Sub-item setting Description
Front On / Off Turns the recording/tally lamp (Front) on/
off.
Rear On / Off Turns the recording/tally lamp (Rear) on/
off.
Technical >HOLD Switch Setting
Sets hold switch settings.
Item Sub-item setting Description
with Rec
Button On / Off Sets whether to lock the recording
button.
with Hand
Grip Remote On / Off Sets whether to lock operation of the grip
remote control.
Technical >Rec Review
Sets recording review settings.
Item Sub-item setting Description
Setting 3sec / 10sec / Clip Selects the time for playback of clips just
recorded for recording review.
Technical >Handle Zoom
Sets handle zoom settings.
Item Sub-item setting Description
Setting Off / Low / High / Variable Sets the speed of the handle zoom.
High 1 to 8 ( 8 ) Sets the zoom speed of the handle zoom
lever when High handle zoom speed is
selected.
Low 1 to 8 ( 3 ) Sets the zoom speed of the handle zoom
lever when Low handle zoom speed is
selected.
[Note]
Uneven zooming may occur when the zoom
speed is set to a low value.
Technical >GPS
Sets GPS settings.
Item Sub-item setting Description
GPS On / Off Turns the GPS function on/off.
[Note]
The GPS module is built into the handle.
Technical >Menu Settings
Sets settings related to the menu.
Item Sub-item setting Description
User Menu
Only On / Off Sets whether to display the User menu
only (On) or display the menu list (Off)
when the camcorder displays the menu.
User Menu
with Lock On / Off Sets whether to lock the menu display,
showing the User menu only.
[Note]
In normal menu display operation, this item is
not displayed. For details about menu display
operation, see page 67.
Technical >Fan Control
Sets fan control mode settings.
Item Sub-item setting Description
Setting Auto / Minimum / Off in Rec Sets the control mode of the camcorder
fan.
[Note]
Even when Off in Rec is selected, the fan will
operate if the internal temperature of the
camcorder rises above a certain value.