Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 77)

6. Menu Display and Settings: Shooting Menu 77
Shooting >Offset White
Sets white balance offset settings.
Item Sub-item setting Description
Offset
Tint –99 to +99 ( ±0 ) Sets the Tint value offset to be added to
the white balance in memory A when
Offset White is set to On.
[Note]
Since Offset Tint is clipped at ±99 during R/B
Gain operation, it may not be possible to
display the correct Offset Tint value for the R/B
Gain value.
Offset White
On / Off Selects whether to add (On) or not to add
(Off) an offset value to the white balance
in memory B.
Offset Color
Temp –99 to +99 ( ±0 ) Sets the color temperature offset to be
added to the white balance in memory B
when Offset White is set to On.
[Note]
Since Offset Color Temp is clipped at ±99
during R/B Gain operation, it may not be
possible to display the correct Offset Color
Temp value for the R/B Gain value.
Offset
Tint –99 to +99 ( ±0 ) Sets the Tint value offset to be added to
the white balance in memory B when
Offset White is set to On.
[Note]
Since Offset Tint is clipped at ±99 during R/B
Gain operation, it may not be possible to
display the correct Offset Tint value for the R/B
Gain value.
Offset White
On / Off Selects whether to add (On) or not to add
(Off) an offset value to the ATW white
balance.
Offset Color
Temp –99 to +99 ( ±0 ) Sets the color temperature offset to be
added to the ATW white balance when
Offset White is set to On.
Offset
Tint –99 to +99 ( ±0 ) Sets the Tint value offset to be added to
the ATW white balance when Offset
White is set to On.
Shooting >Focus
Sets focus settings.
Item Sub-item setting Description
AF Transition
Speed 1(Slow) / 2 / 3 / 4 / 5 / 6 / 7(Fast) Sets the speed of the focus drive for
when the subject changes during auto
focus.
AF Subj. Shift
Sens. 1(Locked On) / 2 / 3 / 4 / 5(Responsive) Sets the sensitivity for changing subject
focus during auto focus.
Focus Area Wide / Zone / Flexible Spot Sets the target area for auto focus and
push auto focus (AF) (page 31).
Wide:
Searches for a subject over a wide
angle of the image when focusing.
Zone:
Automatically searches for a focus
point within the specified zone.
Flexible Spot:
Focuses on a specified position in the
image.
Focus Area
(AF-S) Flexible Spot Sets the target area for push auto focus
(AF-S).
Face
Detection AF Face Only AF / Face Priority AF / Off Enables/disables face detection AF.
Push AF
Mode AF / Single-shot AF(AF-S) Sets the push auto focus mode.
AF Assist On / Off When set to On, allows you to
temporarily override auto focus and set
focus manually.
Shooting >S&Q Motion
Sets Slow & Quick Motion mode settings (page 42).
Item Sub-item setting Description
Setting On / Off Turns Slow & Quick Motion on/off.
When set to On, the following functions
are disabled.
ˎ Auto iris
ˎ Auto focus
Frame Rate 1fps to 60fps / 100fps / 120fps Sets the frame rate for Slow & Quick
Motion shooting.
[Note]
The available settings vary depending on the
selected system frequency, codec, and video
format.