Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 85)

6. Menu Display and Settings: Project Menu 85
Project >Planning Metadata
Sets settings related to planning metadata operations.
Item Sub-item setting Description
Load
Media(A) or
Load
Media(B) Execute / Cancel Loads planning metadata from the
memory card in slot A or B.
Select Execute to display the list of the
planning metadata files stored on the
memory card in slot A or B. Select a file
using Load and then select Execute to
load the file.
[Notes]
ˎ ˎ The file list displays up to 64 files. Even if the
total number of planning metadata files is
64 or less, all of the planning metadata files
may not appear if the directory where they
are located in the memory card (XDROOT/
General/Sony/Planning) contains 512 or
more files.
ˎ ˎ After you start loading, do not remove the
memory card until the completion message
is displayed.
Project >Planning Metadata
Sets settings related to planning metadata operations.
Item Sub-item setting Description
Properties Execute / Cancel Select Execute to display the properties
of the planning metadata loaded in the
memory of the camcorder.
File Name:
File name
Assign ID:
Assigned ID
Created:
Time and date the file was created
Modified:
Time and date of most recent file
modification
Modified by:
Name of person who modified the
file
Title1:
Title1 specified in file (clip name in
ASCII format)
Title2:
Title2 specified in file (clip name in
UTF-8 format)
Material Group:
Number of material groups (groups
of clips recorded using the same
planning metadata)
Shot Mark0 to 9:
Names defined for shot marks 0 to 9
Clear
Memory Execute / Cancel Select Execute to clear the planning
metadata loaded in the memory of the
camcorder.
Clip Name
Display Title1(ASCII) / Title2(UTF-8) Sets the display mode of the clip name
specified in planning metadata.