Monitoring menu – Sony Ultra Wide Converter For SEL16F28 and SEL20F28 User Manual
Page 92
6. Menu Display and Settings
92
This section describes the function and settings of each menu item.
Factory default settings are shown in bold (for example,
18dB
).
Monitoring >Output On/Off
Sets video output settings.
Item
Sub-item setting
Description
SDI1
On
/ Off
Turns SDI1 output on/off.
SDI2
On
/ Off
Turns SDI2 output on/off.
HDMI
On
/ Off
Turns HDMI output on/off.
Monitoring >Output Format
Sets output format settings.
Item
Sub-item setting
Description
SDI1
For details about settings, see “Output
Formats and Limitations” (page 115).
Sets the SDI and HDMI output resolution.
[Note]
The Output Format setting may not be
configurable in Picture Cache Rec mode. If this
occurs, temporarily set Picture Cache Rec to
Off, and then change the setting.
SDI2
HDMI
REF
Monitoring >Output Display
Sets output signal settings.
Item
Sub-item setting
Description
Setting
On
/ Off
Selects whether to superimpose menus
and status on the SDI output signal and
HDMI output signal.
SDI1
Settings vary depending on the Output
Format setting. For details, see “Output
Formats and Limitations” (page 115).
Displays whether the menu and status
information is embedded in the SDI1
output signal.
SDI2
Displays whether the menu and status
information is embedded in the SDI2
output signal.
HDMI
Displays whether the menu and status
information is embedded in the HDMI
output signal.
Monitoring >Display On/Off
Sets display item settings.
Item
Sub-item setting
Description
Network
Status
On
/ Off
Selects the items to display in the
viewfinder.
File Transfer
Status
On
/ Off
Rec/Play
Status
On
/ Off
Tally
On
/ Off
NCM/
Streaming
Status
On
/ Off
Battery
Remain
On
/ Off
Focus Mode
On
/ Off
Focus
Position
On
/ Off
Focus Area
Indicator
On
/ Off
Focus Area
Ind.(AF-S)
On
/ Off
Face
Detection
Frame
On
/ Off
Lens Info
On /
Off
Imager Scan
Mode
On
/ Off
Rec Format
On
/ Off
Frame Rate
On
/ Off
Zoom
Position
On
/ Off
UWP RF Level
On
/ Off
GPS
On
/ Off
SteadyShot
On
/ Off
Gamma/LUT
On
/ Off
Monitoring Menu