Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 109)

6. Menu Display and Settings: Saving and Loading Configuration Data 109
Loading a Scene File
To load from internal memory
1
Select Scene File >Recall Internal Memory
>Execute in the Paint menu (page 89).
A scene file list screen appears.
2
Select a file to load.
A confirmation screen appears.
3
Select Execute.
[Tip]
Scene files can also be loaded into the camcorder
using the direct menu (page 41).
To load from an SD card or “Memory
Stick” media
1
Insert the SD card or “Memory Stick”
media on which the scene file is saved
into the UTILITY SD/MS card slot
(page 8) with the label facing right.
2
Select Scene File >Load Utility SD/MS
>Execute in the Paint menu (page 89).
A scene file list screen appears.
3
Select a file to load.
A confirmation screen appears.
4
Select Execute.
Changing the File ID
1
For a user file, select User File >File ID in
the Project menu (page 84).
For an ALL file, select All File >File ID in the
Project menu (page 84).
For a scene file, select Scene File >File ID
in the Paint menu (page 89).
A screen for editing the File ID appears.
2
Use the arrow buttons (page 7) or the
multi-function dial (page 4) to select a
character, then press the SET button
(page 7) or multi-function dial.
3
Repeat step 2 as required.
4
When finished entering characters, select
Done.