Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 96)

6. Menu Display and Settings: Audio Menu 96
Audio >Audio Input
Sets audio input settings.
Item Sub-item setting Description
CH2 Level Input without XLR adaptor
Audio Input Level / Side / Level+Side
Input with XLR adaptor (page 40)
Audio Input Level / Through
Sets the combination of audio input level
adjustments enabled for recording
channel 2.
[Note]
“Side” refers to the AUDIO LEVEL (CH2) dial on
the side of the camcorder. When Level+Side
is selected, the audio recording level is
determined by the combination of the Audio
Input Level and dial settings (page 131).
CH3 Level Input without XLR adaptor
Audio Input Level / Side / Level+Side
Input with XLR adaptor (page 40)
Audio Input Level / Through
Sets the combination of audio input level
adjustments enabled for recording
channel 3.
[Note]
“Side” refers to the AUDIO LEVEL (CH3) dial on
the side of the camcorder. When Level+Side
is selected, the audio recording level is
determined by the combination of the Audio
Input Level and dial settings (page 132).
CH4 Level Input without XLR adaptor
Audio Input Level / Side / Level+Side
Input with XLR adaptor (page 40)
Audio Input Level / Through
Sets the combination of audio input level
adjustments enabled for recording
channel 4.
[Note]
“Side” refers to the AUDIO LEVEL (CH4) dial on
the side of the camcorder. When Level+Side
is selected, the audio recording level is
determined by the combination of the Audio
Input Level and dial settings (page 132).
Audio >Audio Output
Sets audio output settings.
Item Sub-item setting Description
Monitor CH CH1/CH2 / CH3/CH4 / MIX ALL / CH1 /
CH2 / CH3 / CH4
Selects the audio channel output to the
headphone jack and built-in speaker.
[Note]
If audio for multiple channels is set for
simultaneous output, the output level for
each channel is reduced for output to prevent
clipping.
Headphone
Out Mono / Stereo Selects whether the headphone jack
output is monaural (Mono) or stereo
(Stereo).
Audio >Audio Output
Sets audio output settings.
Item Sub-item setting Description
Alarm Level 0 to 7 ( 4 ) Adjusts the volume of the alarm.
HDMI Output
CH CH1/CH2 / CH3/CH4 Sets the combination of audio channels
on the HDMI output.