Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 52)

4. Network Functions 52
You can connect the camcorder to the Internet
using a modem, wired LAN, or wireless LAN.
Connecting using a Modem
You can connect the camcorder to the Internet
via a 3G/4G network by attaching an XDCA-
FX9 (page 23) to the camcorder and an
optional modem to the XDCA-FX9.
Attaching and using more than one modem
at the same time enables high-quality
streaming in network client mode, using two
lines for higher quality streaming and device
redundancy.
For details about compatible modems,
contact your Sony dealer or a Sony service
representative.
[Note]
A modem cannot be used at the same time as a wired
LAN.
Attaching an XDCA-FX9 to the unit
Attach a modem that supports the USB
standard to the USB 2.0 (HOST) connector
of the XDCA-FX9. Two modems can be used
simultaneously by connecting modems to
both connectors.
[Note]
Attach/remove the modem while the camcorder is
turned off.
Connecting to a network
1
Turn the camcorder on.
2
Set Modem >Setting in the Network menu
to On.
[Note]
It may take some time (about 1 minute) to connect
to a 3G/4G network. Wait until the network status
indicator (page 10) modem icon shows a
strength of 1 or higher on the viewfinder screen.
Connecting using Wireless LAN
Station Mode
You can connect the camcorder to the Internet
in Wi-Fi station mode via an optional wireless
LAN router or by tethering to a device.
Smartphone/
tablet
Wireless LAN
router
Computer
Internet
Smartphone/
tablet
Internet
Connect to the wireless LAN router or device
as described in “Connecting using Wireless
LAN Station Mode” (page 50).
Connecting to the Internet