Sony Ultra Wide Converter For SEL16F28 and SEL20F28 User Manual
Page 100
6. Menu Display and Settings: Technical Menu
100
Technical >Lens
Sets settings related to lenses.
Item
Sub-item setting
Description
Zoom Ring
Direction
Left(W)/Right(T)
/ Right(W)/Left(T)
Sets the direction of zoom ring operation.
[Note]
Enabled only when using an E-mount lens that
supports zoom ring direction switching.
Shading
Compensation
Auto
/ Off
Turns automatic shading compensation
on/off.
Chroma
Aberration
Comp.
Auto
/ Off
Turns automatic chromatic aberration
compensation on/off.
Distortion
Comp.
Auto
/ Off
Turns automatic distortion compensation
on/off.
[Note]
Distortion compensation is not applied when
Imager Scan Mode is set to S35.
Distance
Display
Meter
/ Feet
Sets the display units for lens information
and focus position.
Zoom
Position
Display
Focal Length /
Number
/ Bar
Sets the display format for the zoom
position.
Technical >Video Light Set
Sets the video light lighting method. Available only when using the HVL-LBPC (option).
Item
Sub-item setting
Description
Video Light
Set
Power Link
/ Rec Link / Rec Link + Stby
Sets the lighting control method for the
video light attached to the multi-
interface shoe.
Power Link:
Turns the video light on/off when the
camcorder is turned on/off.
Rec Link:
Turns the video light on/off when the
camcorder starts/stops recording.
Rec Link + Stby:
Turns the video light on/standby
when the camcorder starts/stops
recording.
Technical >APR
Executes APR.
Item
Sub-item setting
Description
APR
Execute / Cancel
Runs APR (Automatic Pixel Restoration)
for image sensor auto adjustment.
Execute: Execute function.
[Note]
Always attach the lens cap before running APR.
Technical >Camera Battery Alarm
Sets battery low-voltage alarm settings.
Item
Sub-item setting
Description
Low Battery
5% /
10%
/ 15% / … / 45% / 50%
Sets the remaining battery level to
display a battery low-voltage alarm (5%
increments).
Battery
Empty
3%
to 7%
Sets the remaining battery level to
display a battery empty alarm.
Technical >Camera DC IN Alarm
Sets input voltage alarm settings.
Item
Sub-item setting
Description
DC Low
Voltage1
16.0V to 19.0V (
16.5V
)
Sets the voltage to display a DC IN low
input voltage alarm.
DC Low
Voltage2
15.5V
to 18.5V
Sets the voltage to display a DC IN
insufficient input voltage alarm.
Technical >Ext. Unit Battery Alarm
Sets XDCA-FX9 battery settings.
Item
Sub-item setting
Description
Near End:Info
Battery
5%
to 100%
Sets the remaining battery level to
display a Info-Lithium battery low-
voltage alarm (5% increments).
End:Info
Battery
0%
to 5%
Sets the remaining battery level to
display a Info-Lithium battery end alarm
and to stop media access.
Near
End:Sony
Battery
11.5V
to 17.0V
Sets the remaining battery level to
display a battery low-voltage alarm for a
non Info-Lithium battery.
End:Sony
Battery
11.0V
to 14.0V
Sets the remaining battery level to
display a battery end alarm for a non
Info-Lithium battery and to stop media
access.