Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 57)

4. Network Functions: Using Network Client Mode 57
Transferring Files in Network
Client Mode
You can transfer files to a server set by the
CCM by connecting a Network RX Station
acting as a CCM and the camcorder in network
client mode.
1
Select the file to upload from the CCM or
other source.
ˎ ˎ To transfer a proxy file
Perform steps 1 to 4 in “Uploading a
proxy file on an SD card” (page 60).
ˎ ˎ To transfer an original file
Perform steps 1 to 4 in “Uploading an
original file on an XQD memory card”
(page 60).
[Note]
The destination can also be set to “NCM: RX Server”
when not in network client mode. In this case, transfer is
placed on hold, and then transfer to the server specified
on the CCM starts after connecting to the CCM in
network client mode.