Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 94)

6. Menu Display and Settings: Monitoring Menu 94
Monitoring >VF Setting
Sets viewfinder settings.
Item Sub-item setting Description
Contrast –99 to +99 ( ±0 ) Adjusts the contrast (difference between
light and dark) of the viewfinder image.
Brightness –99 to +99 ( ±0 ) Adjusts the brightness of the viewfinder
image.
Color Mode Color / B&W Selects the display mode of the
viewfinder in E-E/recording mode.
Monitoring >Gamma Display Assist
Sets gamma display assist settings.
Item Sub-item setting Description
Setting On / Off Selects the gamma display assist
function settings for Custom mode and
Cine EI mode.
Monitoring >Peaking
Sets peaking settings.
Item Sub-item setting Description
Setting On / Off Turns the peaking function on/off.
Type Normal / Color Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Normal
Peaking
Frequency Normal / High Selects the peaking frequency.
Normal
Peaking Level 0 to 99 ( 50 ) Sets the normal peaking level.
Color B&W / Red / Yellow / Blue Selects the color of the color peaking
signal.
Color Peaking
Level 0 to 99 ( 50 ) Sets the color peaking level.
Monitoring >Zebra
Sets zebra pattern settings.
Item Sub-item setting Description
Setting On / Off Turns the Zebra function on/off.
Zebra Select 1 / 2 / Both Selects the zebra pattern type (Zebra 1,
Zebra 2, Both).
Zebra1 Level 0% to 107% ( 70% ) Sets the Zebra 1 display level.
Monitoring >Zebra
Sets zebra pattern settings.
Item Sub-item setting Description
Zebra1
Aperture
Level 1% to 20% ( 10% ) Sets the Zebra 1 aperture level.
Zebra2 Level 0% to 109% ( 100% ) Sets the Zebra 2 display level.