Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 78)

6. Menu Display and Settings: Shooting Menu 78
Shooting >Monitor LUT
Sets monitor LUT settings. Available only when shooting in Cine EI mode.
Item Sub-item setting Description
LUT Select 709(800%) / HG8009G40 / HG8009G33 /
S-Log3 /
s709
Selects the monitor LUT type.
709(800%):
Signal with ITU-R709 base curve with
extended dynamic range up to 800%.
HG8009G40:
Signal using HyperGamma with 800%
dynamic range, 109% white limit, and
18% gray card video output of 40%.
HG8009G33:
Signal using HyperGamma with 800%
dynamic range, 109% white limit, and
18% gray card video output of 33%.
S-Log3:
Log signal with 1300% dynamic range
that mimics film characteristics, close
to Cineon Log curve.
s709:
Cinema color equivalent to
709(800%).
Shooting >Monitor LUT Setting
Adjusts monitor LUT settings. Available only when shooting in Cine EI mode.
Item Sub-item setting Description
Internal Rec MLUT On / MLUT Off Selects whether to apply monitor LUT to
the main video recorded on XQD memory
cards.
Monitor Out MLUT On / MLUT Off Selects whether to apply monitor LUT to
recorded video and video output, other
than the main video recorded on XQD
memory cards.
HD(Sub) Rec/
Proxy Display only Displays whether monitor LUT is applied
to the HD (Sub) video and proxy
recording video during 4K & HD (Sub)
recording.
SDI1 Display only Displays whether monitor LUT is applied
to the SDI1 video output.
SDI2 Display only Displays whether monitor LUT is applied
to the SDI2 video output.
HDMI Display only Displays whether monitor LUT is applied
to the HDMI video output.
Shooting >Monitor LUT Setting
Adjusts monitor LUT settings. Available only when shooting in Cine EI mode.
Item Sub-item setting Description
VF/Streaming Display only Displays whether monitor LUT is applied
to the viewfinder and streaming video
output.
Shooting >Noise Suppression
Sets noise suppression settings.
Item Sub-item setting Description
Setting
(Custom) On / Off Turns the noise suppression function on/
off in Custom mode.
Level
(Custom) Low / Mid / High Sets the noise suppression level in
Custom mode.
Setting
(Cine EI) On / Off Turns the noise suppression function on/
off in Cine EI mode.
Level
(Cine EI) Low / Mid / High Sets the noise suppression level in Cine EI
mode.
Shooting >Flicker Reduce
Sets flicker correction settings.
Item Sub-item setting Description
Mode Auto / On / Off Sets the flicker correction mode.
Frequency 50Hz / 60Hz Sets the frequency of the power source
supplying the lighting that is causing the
flicker.
Shooting >SteadyShot
Sets image stabilization settings.
Item Sub-item setting Description
Setting Active / Standard / Off Turns the image stabilization function
on/off.
[Note]
Enabled when a compatible lens is attached.