Sony Ultra Wide Converter For SEL16F28 and SEL20F28 User Manual
Page 82
6. Menu Display and Settings: Project Menu
82
Project >Interval Rec
Sets interval recording mode settings (page 42).
Item
Sub-item setting
Description
Pre-Lighting
Off
/ 2sec / 5sec / 10sec
Sets the number of seconds that the
video light turns on before recording
starts in Interval Rec recording mode.
[Tip]
Available only when using the HVL-LBPC
(option).
Project >Picture Cache Rec
Sets picture cache recording mode settings (page 43).
Item
Sub-item setting
Description
Setting
On /
Off
Turns the picture cache recording
function on/off.
Cache Rec
Time
Settings vary according to the recording
format setting.
Sets the time for accumulation of images
in picture cache memory (picture cache
recording time).
Project >SDI/HDMI Rec Control
Sets SDI/HDMI recording control settings.
Item
Sub-item setting
Description
Setting
Off
/ SDI/HDMI Remote I/F / Parallel Rec
Sets recording start/stop control of an
external device via the SDI/HDMI output
signal.
Off:
Do not use remote control.
SDI/HDMI Remote I/F:
Record stop/start control of an
external connected device, when
there is no media inserted in the
camcorder. Not synchronized with
frame accuracy to camcorder media.
Parallel Rec:
Record stop/start control of an
external connected device, when
media is inserted in the camcorder.
Synchronized with frame accuracy to
camcorder media.
Project >Assignable Button
Sets function assignments to assignable buttons.
Item
Sub-item setting
Description
<1> to <10>,
Focus Hold
Button
Off / Base ISO/Sensitivity / AGC / Push
AGC / ND Filter Position / Auto ND Filter /
Push Auto ND / Auto Iris / Push Auto Iris /
Auto Shutter / Auto Exposure Level /
Backlight / Spotlight / Preset White Select
/ ATW / ATW Hold / Focus Setting / Focus
Area / Focus Area(AF-S) / Face Detection
AF / Push AF Mode / Push AF/Push MF /
Focus Hold / Focus Magnifier x3/x6 /
Focus Magnifier x3 / Focus Magnifier x6 /
S&Q Motion / High/Low Key / Flash Band
Reduce / SteadyShot / Rec / Picture Cache
Rec / Clip Continuous Rec / Rec Review /
Last Clip Del. / Shot Mark1 / Shot Mark2 /
Clip Flag OK / Clip Flag NG / Clip Flag Keep
/ Color Bars / Tally [Front] / DURATION/
TC/U-BIT / Display / Lens Info / Video
Signal Monitor / Marker / VF Adjust / VF
Mode / Gamma Display Assist / Peaking /
Zebra / Thumbnail / Handle Zoom / NFC /
Network Client Mode / Auto Upload (Proxy)
/ Streaming / Direct Menu / User Menu /
Menu
Assigns functions to assignable buttons.
Base ISO/Sensitivity:
Switches the base sensitivity of the
image sensor.
AGC:
Turns the AGC function on/off.
Push AGC:
Enables the AGC function while the
button is pressed.
ND Filter Position:
Switches ND filters.
Auto ND Filter:
Turns the auto ND filter function on/
off.
Push Auto ND:
Enables the auto ND filter function
while the button is pressed.
Auto Iris:
Turns the iris function on/off.
Push Auto Iris:
Enables the auto iris function while
the button is pressed.
Auto Shutter:
Turns the auto shutter function on/
off.
Auto Exposure Level:
Displays/exits the Auto Exposure
Level direct menu.
Backlight:
Switches between Backlight and
Standard.
Spotlight:
Switches between Spotlight and
Standard.
Preset White Select:
Switches the white balance preset
mode value.
ATW:
Turns the ATW function on/off.
ATW Hold:
Pauses ATW function operation.
Focus Setting:
Sets the focus area.