Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 80)

6. Menu Display and Settings 80
Project Menu
This section describes the function and settings of each menu item.
Factory default settings are shown in bold (for example,
18dB ).
Project >Base Setting
Sets base settings.
Item Sub-item setting Description
Shooting
Mode Custom / Cine EI Sets the shooting mode (page 24).
Project >Rec Format
Sets recording format settings.
Item Sub-item setting Description
Frequency 59.94 / 50 / 29.97 / 25 / 23.98 Selects the system frequency.
Imager Scan
Mode FF 6K / S35 4K / FF 2K / S35 2K Sets the combination of imager readout
method (all pixels/pixel binning) and
imager size setting.
Codec XAVC-I / XAVC-L / MPEG HD 422 Sets the recording/playback mode.
Project >Rec Format
Sets recording format settings.
Item Sub-item setting Description
Video Format The available settings vary depending on
the Frequency and Codec settings.
Sets the recording format.
Frequency Codec Selection options
59.94 XAVC-I 3840×2160P
1920×1080P
1920×1080i
XAVC-L 3840×2160P
1920×1080P 50
1920×1080P 35
1920×1080i 50
1920×1080i 35
1920×1080i 25
MPEG
HD422 1920×1080i 50
50 XAVC-I 3840×2160P
1920×1080P
1920×1080i
XAVC-L 3840×2160P
1920×1080P 50
1920×1080P 35
1920×1080i 50
1920×1080i 35
1920×1080i 25
MPEG
HD422 1920×1080i 50
29.97 XAVC-I 3840×2160P
1920×1080P
XAVC-L 3840×2160P
1920×1080P 50
1920×1080P 35
MPEG
HD422 1920×1080P 50