Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 63)

5. Thumbnail Screen 63
Playing Clips
Playing Recorded Clips
You can play recorded clips when the
camcorder is in recording standby (Stby)
mode.
1
Insert an XQD memory card for playback.
2
Press the THUMBNAIL button.
3
Use the arrow buttons (page 7) or
multi-function dial (page 4) to move
the cursor to the thumbnail for the clip
you want to play.
4
Press the SET button or multi-function
dial.
Playback begins from the start of the
selected clip.
You can control playback by pressing the
following buttons.
Press the SET button or multi-function dial:
Pauses playback.
Press again to return to normal playback.
Press the left/right arrow buttons:
Jumps to start of clip/start of next clip.
Press and hold the left/right arrow buttons:
Fast reverse/forward.
Returns to normal playback when you
release the button.
CANCEL/BACK button:
Stops playback, and returns to recording
standby mode.
[Notes]
ˎ ˎ There may be momentary picture breakup or still
image display at the boundary between clips. You
cannot operate the camcorder during this period.
ˎ ˎ When you select a clip in the thumbnail screen and
begin playback, there may be momentary picture
breakup at the start of the clip. To start playback
without distortion from the beginning of the clip,
pause playback once after starting it, press the left
arrow button to return to the start of the clip, then
restart playback.
ˎ ˎ You can also use the multi selector (page 9).