Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 120)

8. Appendix: Error/Warning Messages 120
Display message Cause and Solution
An IP address conflict has occurred.
Please check the network settings. There is a conflict in the network addresses of the wireless
LAN, wired LAN, modem, or between modems.
Change the address manually or change the settings for the
network router.
The IP address of the Wireless LAN
Access Point Mode has been
changed due to an IP address
conflict. The IP address of the wireless LAN access point mode was
changed due to a conflict in the network addresses of the
wireless LAN access point mode, wired LAN, or modem.
Check the IP address setting.
1) “(B)” is displayed for the card in slot B.