Sony Ultra Wide Converter For SEL16F28 and SEL20F28 - Manual (Page 59)

4. Network Functions: Using Web Remote Control 59
Web Remote Control Compatible
Devices
You can use a tablet or computer to configure
and operate the camcorder.
The supported devices, OS, and browsers are
shown in the following table.
Device OS Browser
Tablet Android 7/8 Chrome
iOS 12 Safari
Computer Windows
7/8.1/10 Chrome
macOS
10.13/10.14 Safari
For details about devices supported using the
“Content Browser Mobile” application, contact
your Sony sales or service representative.
Web Remote Control Menu
Tapping in the top left of the screen will
display the screen selection menu. Select
Monitoring Settings to display the Monitoring
Settings screen.
Tapping
in the top left of the Monitoring
Settings screen will display the setup menu for
tasks, such as file transfer.
Menu items
ˎ ˎ Remote Control
Camera Control
ˎ ˎ Monitoring
Monitoring Settings
ˎ ˎ File Transfer
Slot A
Slot B
Slot SD/MS
Job List
Upload Settings
Video monitoring settings (Monitoring
Settings)
You can set the format when monitoring on a
device.
Size
Sets the picture size and bit rate of the video
for monitoring.
ˎ ˎ 480×270(1Mbps)
ˎ ˎ 480×270(0.5Mbps)
Frame Rate
Displays the frame rate of the video for
monitoring.
File transfer settings (Upload Settings)
You can change the server settings for
uploading a proxy file or an original file that is
recorded on the camcorder.
Registering a destination server
Select a server in the Upload Server list and
tap Edit to display the server setup screen,
then set each item to register a server.
You can also register a server using File
Transfer (page 105) in the Network menu.
A server configured here will be displayed in
the file transfer list on the Slot A, Slot B, and
Slot SD/MS screens when uploading a file.
Upload Server Edit screen
Tap OK to apply the settings. Tap Cancel to
cancel the settings.
Service
Displays the server type.
“FTP”: FTP server
Display Name
Enter the name of the server to display in the
list.
Host Name
Enter the address of the server.
Port
Enter the port number of the server to
connect.
User Name
Enter the user name.
Password
Enter the password.
[Notes]
ˎ ˎ The password is cleared when the Edit screen is
opened for security reasons. Enter a new password
twice to change the password.
ˎ ˎ From a security standpoint, it is recommended that
you set a password with a sufficiently long character
string that is hard to guess by others, and that you
store it safely.