Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 9)

9
B DIRECT RECALL button
Recalls a preset stored in the target camera. Direct
recall mode is enabled when the button is lit. Press
PRESET 1 to PRESET 10/0 to recall the stored
settings immediately.
For details, see “Storing the Camera Status (Preset
Function)” (page 36).
C CLEAR button
Clears the currently entered preset number.
Pressing and holding the CLEAR button cancels
the operation by the recall, and then the movement
stops at its position.
D
ACTIVE button
Enables/disables operation of the preset memory
control block.
When the button is turned on (button is lit), the
preset memory control block becomes enabled.
When the button is turned off (button is not lit), the
preset memory control block becomes disabled.
E STORE button
Stores the camera status in the internal memory of
the camera for the specified preset number.
For details, see “Storing the Camera Status (Preset
Function)” (page 36).
F
RECALL button
Recalls a preset stored in the target camera.
For details, see “Recalling stored status” (page 36).
Joystick control block
Use to control the pan, tilt, and zoom of the target
camera using a joystick.
The joystick control block is enabled when the
4 ACTIVE button is lit.
Select the target camera to control the pan, tilt, and zoom
using a joystick.
For details about camera pan, tilt, and zoom operations,
see “Pan and tilt control” (page 31).
A Joystick
Controls the pan, tilt, and zoom operation of the
target camera.
Pan/tilt: Incline the joystick left/right to rotate the
camera counterclockwise/clockwise (pan left/
right), incline the joystick forward/backward to
tilt the camera up/down. The panning/tilting
speed changes according to the angle at which
you incline the joystick. Movement stops when
the joystick returns to the center position
(position the joystick returns to after removing
your hand).
Zoom: Turn the ZOOM ring on the upper part of
the joystick clockwise to make the subject larger
(zoom in). Turn it counterclockwise to make the
subject smaller (zoom out).
A -a Joystick button
Press and hold to return the orientation of the
camera to face the front.
A -b ZOOM ring
Controls the zoom.
For details, see “To control the zoom using the
ZOOM ring on the top of the joystick” (page 32).
B PAN-TILT SPEED knob
Adjusts the speed of pan/tilt operations in response
to the joystick.
For details, see “To adjust the pan/tilt speed”
(page 31).
C
P/T RST (pan/tilt reset) button
Press the button to reset the pan/tilt position of the
target camera.
D
ACTIVE button
Enables/disables operation of the joystick control
block.
When the button is turned on (button is lit),
operation of the joystick control block becomes
enabled.
When the button is turned off (button is not lit),
operation of the joystick control block becomes
disabled.
2 3 4
1
1
1