Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 43)

43
Checking Camera
Settings Status (Status
Display)
Press an assign button (ASSIGN 1 to ASSIGN 3) with
the camera status display function assignment to display
the current iris, gain, shutter speed, and zoom position
status of the target camera on the LCD panel for about
three seconds.
After approximately three seconds, the display
automatically turns off.
ZOOM position indicator
s represents the divisions between the WIDE and
TELE positions, while x represents the current position
from the WIDE end.
a indicates Clear Image Zoom and the digital zoom
range. The indicator changes from a to z when the
camera zoom is in that range.
Restoring Factory
Default Settings
You can restore all settings stored in the unit to their
factory default values.
This operation is performed using MAINTENANCE
>RESET in the RM menu.
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to MAINTENANCE.
3
Press the SELECT button.
The MAINTENANCE menu appears.
4
Turn the SELECT knob to select RESET.
The RESET screen appears.
5
Turn the SELECT knob to move the cursor
to RESET ALL.
p RESET ALL : : NOT EXEC
6
Turn the VALUE knob to change NOT EXEC
to EXEC, then press the VALUE button.
The following message appears, prompting you to
reboot the unit.
7
Turn the VALUE knob to change NO to YES,
then press the VALUE button.
The unit reboots automatically.
xxssssssa
T WIDE TELE t