Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 47)

47
RM Menu List
OPERATION
You can check and change camera menu settings while
operating a camera. This menu is also used to set and
change the speed of movement between positions when
using the preset memory function.
During operation, the settings of the OPERATION
menu setup items display the settings configured on the
camera.
Accordingly, default settings are not indicated in the
description of each setting.
To store the settings changed using this menu, use the
preset memory function of the camera. For details about
items saved with a preset number, refer to the operating
instructions of each camera.
Notes
• Items that cannot be set on the selected camera display
“---” as the setting.
• Depending on the camera model, the settings
displayed on the unit and camera menu display may
not be the same. In this case, the settings displayed in
the camera menu are the actual settings.
• When changing a setting, there may be some delay
before the display is updated.
EXPOSURE
Sets the exposure compensation function of the target
camera.
EX-COMP
Turns the exposure compensation mode on/off.
AE LEVEL
Sets the control level for automatic camera brightness
control (exposure compensation level).
ND FILTER
Changes the ND filter in the camera according to the
brightness of the subject being shot. The reduction in
light level using the ND filter increases with increasing
ND filter number (ND2 to ND4). Setting to ND1 turns
the ND filter off.
Menu item Sub menu
item Setup item See
OPERATION
page 47
EXPOSURE EX-COMP page 47
AE LEVEL page 47
ND FILTER page 47
WHITE WB MODE page 48
R. WHITE page 48
B. WHITE page 48
OFFSET page 48
BLACK ABB MODE page 48
R. BLACK page 48
B. BLACK page 48
M. BLACK page 48
DETAIL SETTING page 48
LEVEL page 48
KNEE SETTING page 48
KNEE MODE page 48
POINT page 48
SLOPE page 48
MATRIX MATRIX page 48
SELECT page 48
OTHER PRST SPEED page 49
CIZ page 49
TELE CONV page 49
CONFIG
page 51
RM SETUP AE CONFIG page 51
CAM POWER page 51
ZOOM page 51
CAMERA FREQ page 51
LCD BRIGHT page 51
LAMP DIMMER page 51
SW ASSIGN ASSIGN1 to 6 page 40
DIRECTION JOYSTICK PAN page 51
JOYSTICK TILT page 52
ZOOM LEVER page 52
FOCUS DIAL page 52
GPI I/O SETTING page 52
TALLY MODE page 52
COMMAND SEL page 52
CAMERA LINK page 52
LAN page 53
SERIAL page 53
CONTROL I/F page 53
AUTO IP SETUP
page 53
SETUP IP page 53
ASSIGN CAM page 53
CLEAR TABLE page 53
SWAP CAM page 53
MANUAL page 53
CAMERA TABLE page 53
MAINTENANCE
page 54
MODEL INFO MODEL page 54
S/NO page 54
VERSION page 54
UPDATE MODE page 54
RESET page 54
JOYSTICK SENSITIVITY page 54