Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 40)

40
Press the joystick button to confirm the selection of
items and settings.
4
Exit camera setup menu mode.
Press the CANCEL button repeatedly until the
menu disappears.
Assigning Functions to
Assign Buttons
The functions in the following table can be assigned to
the ASSIGN 1, ASSIGN 2, and ASSIGN 3 buttons of
the color adjustment block and the ASSIGN 4, ASSIGN
5, and ASSIGN 6 buttons of the menu control block.
Functions that can be assigned to the ASSIGN
1, ASSIGN 2, and ASSIGN 3 buttons
* For details on target cameras, see “Function of Buttons/
Knobs in Each Block by Camera Model” (page 45).
Functions that can be assigned to the ASSIGN
4, ASSIGN 5, and ASSIGN 6 buttons
* For details on target cameras, see “Function of Buttons/
Knobs in Each Block by Camera Model” (page 45).
Use the following procedure to assign a function.
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to CONFIG, and press the SELECT button.
The CONFIG menu appears.
3
Turn the SELECT knob to move the cursor
to SW ASSIGN, and press the SELECT
button.
The assign button setup menu appears.
Function LCD display
Backlight compensation BACKLIGHT
Flicker compensation FLICKER
Status display STATUS
Clear Image Zoom
*
CIZ
Teleconvertor
*
TELE CONV
Preset mode switch (MODE 1)
*
MOD1-TRCE
Preset mode switch (MODE 2)
*
MOD2-TRCE
Function LCD display
DETAIL level DETAIL LEVEL
Knee point KNEE
Exposure compensation level AE LEVEL
ND filter
*
ND FILTER
Picture profile
*
P PROFILE