Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 6)

6
A 1 -a R-BLACK knob
1 -b B-BLACK knob
1 -c MASTER BLACK knob
Adjusts the R black, B black, and master black of
the target camera.
For details, see “Adjusting the black balance”
(page 35).
B 2 -a R-WHITE knob
2 -b B-WHITE knob
Sets the R gain and B gain of the target camera, and
adjusts the white balance.
For details, see “Adjusting the white balance”
(page 34).
C
BARS button
Toggles the color bars output of the target camera
on/off.
When the button is turned on (button is lit yellow),
color bars output is turned on.
When the button is turned off (button is not lit),
color bars are not output.
D
CAM POWER button
Toggles the power supply of the target camera on/
off (standby).
When the button is turned on (button is lit green),
the target camera is turned on.
When the button is turned off (button is not lit), the
target camera is turned off (standby).
Notes
• When controlling more than one camera, the
camera on/off operation is determined by the
CONFIG >RM SETUP >CAM POWER setting
in the RM menu. For details, see “CAM
POWER” (page 51).
• SRG-300SE, SRG-301SE, and SRG-201SE do
not turn off (standby).
E
O.P.AWB (one-push auto white balance) button
Executes one-push auto white balance adjustment
on the target camera.
For details, see “To adjust the white balance
automatically” (page 34).
F O.P.ABB (one-push auto black balance) button
Executes one-push auto black balance adjustment
on the target camera.
For details, see “To adjust the black balance
automatically” (page 35).
G ACTIVE button
Enables/disables the color adjustment block.
When the button is turned on (button is lit), the
color adjustment block becomes enabled.
When the button is turned off (button is not lit), the
color adjustment block becomes disabled.
H
ASSIGN 1 button, ASSIGN 2 button, ASSIGN 3
button
Executes functions assigned to each button.
When a button is pressed, the name of the function
assigned to the button is displayed highlighted on
the bottom of the LCD panel for a few seconds.
For details about assigned functions and how to
assign the functions, see “Checking Camera
Settings Status (Status Display)” (page 43).
Menu control block
Comprises buttons and knobs you use to set and execute
functions, and to change settings on the target camera
using menu operations.
For details about menu operations, see “Menu
Operations” (page 12).
A
FUNCTION menu buttons
When a button is pressed, the item and setting of the
function assigned to the button is displayed on the
LCD panel, and the setting can be changed using
the VALUE knob.
The IRIS, GAIN, and SHUTTER button operations
are enabled when the buttons are lit blue.
For details about operation, see “Setting Specific
Functions using Shortcuts (FUNCTION Menu)”
(page 41).
IRIS button: Press this button to display the iris
value settings screen for the camera on the LCD
panel.
GAIN button: Press this button to display the gain
value settings screen for the camera on the LCD
panel.
SHUTTER button: Press this button to display the
shutter speed value settings screen for the
camera on the LCD panel.
ASSIGN 4 button, ASSIGN 5 button, ASSIGN 6
button:
Press these buttons to display the
6
5
4
3
2
7
1