Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) User Manual

Page 7

corresponding setup item and setting of the
function assigned to each button on the LCD panel.
For details about assigned functions and how to
assign the functions, see “Assigning Functions to
Assign Buttons” (page 40).

LCD panel

Displays the RM menu, FUNCTION menu, and
preset memory numbers.
• For details about menu operations, see “Menu

Operations” (page 12).

• For details about the RM menu, see “Storing the

Camera Status (Preset Function)” (page 36).

• For details about the FUNCTION menu, see

“Setting Specific Functions using Shortcuts
(FUNCTION Menu)” (page 41).

• For details about preset numbers, see “Storing the

Camera Status (Preset Function)” (page 36).

SELECT knob and button

Use to select menu items.
For details about menu operations, see “Menu
Operations” (page 12).

VALUE knob and button

Use to select the settings of menu items.
For details about menu operations, see “Menu
Operations” (page 12).

CANCEL button

Use to move from a lower level to a higher level in
the hierarchy for menu items that have a multi-level
hierarchy.

RM MENU button

Press this button to display the setup menu of the
unit on the LCD panel.
For details about menu operations, see “Menu
Operations” (page 12).

CAM MENU button

Press and hold this button to display the setup menu
of the camera on the monitor output of the camera.
Nothing is displayed on the LCD panel of the unit.
For details about operation, see “Operating the
Camera Setup Menu from the Unit (Camera Menu
Operation Mode)” (page 39).

Camera selection block

Use to select the target camera to control.
When using LAN connection, the unit can control up to
100 cameras.
When using serial connection, the unit can control up to
7 cameras.

CAMERA 1 to CAMERA 10 buttons,
CAMERA 1 to CAMERA 10 tally input lamps

Selects the target camera from within a group.
For details about selecting the target camera, see
“Selecting a Camera” (page 29).
When a camera selected by an external device, such
as a switcher, is outputting a tally signal, the tally
input lamp on the top of the corresponding camera
button lights up.
For details about tally input lamps, see “About the
tally input lamp indicators” (page 30).

GROUP LEFT button, group number display,
GROUP RIGHT button

Select the target camera group using the GROUP
LEFT button and GROUP RIGHT button. The
number of the selected group is displayed in the
group number display.
Group numbers are used with LAN connections.
For details about selecting a group, see “Selecting a
Camera” (page 29).

Lens control block

Use to control the lens (adjustment and settings) of the
target camera.
The lens control block is enabled when the

ACTIVE

button is lit. Note that the ZOOM SPEED knob is always
enabled.