Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 14)

14
Getting Started
Connections
You can connect the unit to cameras using VISCA over
IP (LAN) connection or VISCA RS-422 (serial)
connection.
The connection method that is used is displayed at the
bottom of the CONFIG menu item in the RM menu.
VISCA over IP (LAN) connection
VISCA RS-422 (serial) connection
• For details about VISCA over IP (LAN) connection,
see “VISCA over IP (LAN) connection” (page 14).
• For details about VISCA RS-422 (serial) connection,
see “VISCA RS-422 (serial) connection” (page 22).
For details about connections, refer to the operating
instructions supplied with the camera.
VISCA over IP (LAN) connection
VISCA over IP (LAN) connection is configured using
the following sequence.
Setting the IP address of the unit
Before connection, set the IP address of the unit.
The setting is configured using CONFIG >LAN in the
RM menu.
1
Press the RM MENU button, turning it on
(button is lit yellow).
The RM menu top menu appears.
2
Turn the SELECT knob to move the cursor
to CONFIG.
3
Press the SELECT button.
The CONFIG menu appears.
4
Turn the SELECT knob to move the cursor
to LAN, and press the SELECT button.
Setting the IP address of the unit (page 14)
m
Connecting remote controllers, cameras, and setup PC
using LAN connection (page 16)
m
Assigning cameras (page 17)
• Assignment using AUTO IP SETUP >SETUP IP
(page 17)
• Assignment using AUTO IP SETUP >ASSIGN
CAM (page 18)
2 ~ 11
1