Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 57)

57
Message Meaning Cause and remedy
DETECTED SAME MAC ADD
BUT DIFFERENT IP ADD The MAC address of a detected camera is the
same as a registered camera, but the IP
address of the camera and the address in the
camera table are different. This message may be displayed when making camera
assignments using AUTO IP SETUP >ASSIGN
CAM.
Change the settings so that the IP address of the
camera matches the IP address in the camera table.
INVALID IP ADDRESS
PLEASE CHANGE IP ADDR A camera configured with the same IP address
as the unit was detected. This message may be displayed when making camera
assignments using AUTO IP SETUP >SETUP IP.
Change the IP address of the camera or the unit so that
they are different.
DUPLICATE IP ADDRESS
DETECTED IN NETWORK Duplicate IP address settings were detected. This message may be displayed when making camera
assignments using AUTO IP SETUP >ASSIGN
CAM.
There are devices with the same IP addresses on the
network. Configure the IP addresses so that they are
different.
SAME IP ADDRESS
ALREADY IN CAM TABLE The IP address of the detected camera is
already registered in the camera table. This message may be displayed when making camera
assignments using AUTO IP SETUP >ASSIGN
CAM.
The IP address of the detected camera is the same as
the IP address of a camera registered in the camera
table. Change either one of the IP addresses.
DIFFERENT IP NETWORK
SET SAME SEGMENT The segment of the IP address of the detected
camera is different from the segment of the
unit. This message may be displayed when making camera
assignments using AUTO IP SETUP >ASSIGN
CAM.
A camera cannot be recognized if the segment of the
IP address of the unit is different. Set the segment of
the IP address of the camera to the same segment as
the IP address of the unit.
ALREADY REGISTRATION IN
THIS GP/CAM A camera is already assigned to the target
GROUP and CAMERA buttons. This message may be displayed when changing
camera assignments for the GROUP and CAMERA
buttons.
A camera is already assigned to the target GROUP
and CAMERA buttons. Assign to different GROUP
and CAMERA buttons.
DUPLICATE IP ADDRESS ON
THE CAMERA TABLE An attempt was made to change an IP address
to an IP address that is registered in the
camera table. This message may be displayed when changing the IP
address of a camera.
Use different IP addresses.
DUPLICATE IP ADDRESS IN
THE NETWORK An attempt was made to change an IP address
to an IP address that is used by a device on the
network. This message may be displayed when changing the IP
address of a camera.
Use different IP addresses.
CAMERA BUSY The camera could not accept the change in
settings. This message may be displayed when changing the IP
address of a camera.
The camera is busy and cannot accept the change in
settings.
NO RESPONSE There was no response from the cameras. This message may be displayed when changing the IP
address of a camera.
There are no cameras on the network or the cameras
are not responding.