Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 27)

27
3
Click the [Backup] button.
The configuration data backup starts.
The default file name of the configuration data file
is rm-ip500.cfg.
Restoring using configuration data
You can restore the unit or another RM-IP500 using
controller configuration device saved on a PC.
1
Access the remote controller you want to
restore using a web browser on the PC.
For details about the access method, see “Accessing
a remote controller” (page 26).
The [Backup/Restore] screen appears.
2
Click the [Browse] button.
The file selection dialog appears.
3
Select the saved controller configuration
data.
4
Click the [Restore] button on the [Backup/
Restore] screen.
The restore process starts.
When the configuration data is restored, the
following message appears and then the remote
controller reboots.
Updating the firmware
1
Download the firmware update from the
download site.
2
Uncompress the downloaded compressed
file.
3
Access the remote controller you want to
update using a web browser on the PC.
For details about the access method, see “Accessing
a remote controller” (page 26).
The [Firmware Update] screen appears.
4
Click [Yes].
The start screen appears.
5
Click the [Start] button.
The firmware selection screen appears.
6
Click the [Browse] button, and select the
firmware update.
7
Click the [OK] button.
The version update starts.
During the version update, “UPDATING” is
displayed on the LCD panel of the unit.
When the version update is finished, an update
completion message appears and the unit reboots
automatically.
8
Press the RM MENU button to display the
RM menu.
9
Check the version using MAINTENANCE
>MODEL INFO.
About the RM-IP Setup Tool
This is a software tool for configuring remote controller
settings. It is used to configure the following.
• IP address settings
• Camera assignments
• Swapping camera numbers
• Checking camera tables
Install the software on the setup PC for the unit.