Sony WI-1000XM2 Noise-Canceling Wireless In-Ear Headphones (Black) - Manual (Page 50)

50
OPERATION menu support by camera model
*1 Target cameras: SRG-360SHE/280SHE, SRG-300SE/301SE/201SE, SRG-300H/301H, SRG-120DH/121DH/120DS/120DU/HD1,
SRG-X400/201M2, SRG-X120/HD1M2
*2 Always set to ON. Cannot be set to OFF.
*3 Supported in firmware version 2.0 or later of BRC-X1000, BRC-H800 and BRC-H780
*4 AUTO2_ATW cannot be selected.
*5 When AUTO2_ATW is selected, the ATW white balance mode on the camera is applied.
*6 Except for SRG-X400/201M2 and SRG-X120/HD1M2, the APERTURE setting of the PICTURE menu on the camera is applied.
*7 SRG-X400/201M2 and SRG-X120/HD1M2 only
*8 SRG-X400/201M2 only
Yes: Supported
–: Not supported
Setup item Function Conditions BRC-X1000/
H800/H780/
X400/X401
BRC-
H900
SRG
series
*1
EXPOSURE EX-COMP Exposure compensation
function on/off – Yes Yes
*2
Yes
AE LEVEL Exposure compensation level
setting Enabled when EX-COMP is
set to ON. Yes Yes Yes
ND FILTER ND filter function on/off – Yes
*3
– –
WHITE WB MODE White balance adjustment
method selection – Yes Yes *4 Yes *5
R. WHITE R. WHITE value setting Enabled when WB MODE is
set to MANUAL. Yes Yes Yes
B. WHITE B. WHITE value setting Enabled when WB MODE is
set to MANUAL. Yes Yes Yes
OFFSET Convergence point offset
adjustment Enabled when WB MODE is
set to AUTO1, AUTO2, or
ONE PUSH. Yes Yes Yes
*7
BLACK ABB MODE Black balance adjustment
function setting – – Yes –
R. BLACK R. BLACK value setting – – Yes –
B. BLACK B. BLACK value setting – – Yes –
M. BLACK M. BLACK value setting – Yes – –
DETAIL SETTING Detail correction function on/
off – Yes
*2
Yes Yes
*2
LEVEL Detail correction level setting Enabled when SETTING is set
to ON.
Yes Yes Yes
*6
KNEE SETTING KNEE correction function on/
off – Yes Yes –
KNEE MODE KNEE adjustment function
AUTO/MANUAL selection Enabled when SETTING is set
to ON. Yes Yes –
POINT KNEE POINT setting Enabled when KNEE MODE
is set to MANUAL. Yes Yes –
SLOPE KNEE slope setting Enabled when KNEE MODE
is set to MANUAL. Yes Yes –
MATRIX MATRIX MATRIX adjustment function
on/off – Yes Yes –
SELECT Built-in preset matrix
selection used for matrix
calculation Enabled when MATRIX is set
to ON. Yes Yes –
OTHER PRST SPEED Speed of movement setting
when switching positions
using the preset memory
function. – Yes Yes Yes
*7
CIZ Clear Image Zoom on/off Yes Yes Yes *8
TELE CONV Teleconvertor function on/off Yes Yes –