Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 6)

6
Panel Descriptions
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* Be sure to use cables and adaptor plugs with the proper connectors matching those of the other devices you are using.
MULTI-VIEW connector
RGB IN 1 connector / HDMI IN 1–4 connectors /
SDI IN 5, 6 connectors
Rear Panel / Front Panel (Connecting Your Equipment)
Input video and audio. Connect video cameras, BD players or other video devices, or computers.
5 The input format is detected automatically.
5 You can use the menu to check the format of the video that is input to each channel, and
whether an HDCP signal is present.
* Use the menu to specify whether you will use the RGB IN 1 connector or the HDMI IN 1 connector.
AUDIO OUT L, R connectors
Output the results of audio mixing.
Connect an audio recorder, amplifier, speakers, or other such equipment.
Analog RGB
output connector
HDMI output
connector
SDI output
connector
HDMI OUT 1–3 connectors /
SDI OUT connector
Outputs the video/audio signals. Connect projectors, recording
equipment, and external displays.
HDMI input
connector
SDI input
connector
HDMI
input connector
Outputs an input/output video list (final output,
preview output, and input channels 1–8) and menus.
Connect a multi-view monitor here.
* The multi-view output is fixed at 1920 x 1080/60 Hz,
RGB, SDR, and HDCP 1.4.
Audio input
connectors
AUDIO IN L, R connectors
Inputs the audio signals.
Connect an audio mixer, CD players, or other such audio equipment.
Audio output
connectors
Pin assignment of AUDIO IN connectors
1: GND 2: HOT
3: COLD
Pin assignment of AUDIO OUT connectors
2: HOT 1: GND
3: COLD