Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 2)

2
Update History
Ver.1.10
Additional functions
5 A function for capturing a still image from the final output video (PGM or PVW) has been added.
Captured still images can be stored on a USB flash drive and loaded from the USB flash drive during boot.
* Still images captured from copyright protected (HDCP) video cannot be stored on a USB flash drive.
5 The number of still images that can be loaded from a USB flash drive was increased from 2 to 8.
You can load or capture up to 8 still images. And you can choose from 8 still images as the source for Ch.7 (STILL1) or Ch.8 (STILL2).
5 PNG has been added as a file format that can be imported via a USB flash drive.
* The alpha channel of PNG files cannot be imported.
5 A function for freezing the final output video (PGM) has been added.
5 Support for the following output formats on HDMI outputs have been added.
1920 x 1080/30 Hz (FHD) (*)
3840 x 2160/30 Hz (UHD 4K)
4096 x 2160/30 Hz (DCI 4K)
*: “1920 x 1080/30 Hz (FHD)” is output when the following settings are used.
– In System menu 0 Processing 0 Format: 3840x2160
– In System menu 0 Frame Rate: 30Hz
– In Output menu 0 HDMI OUT 1–3 0 Down Convert: Enabled
5 Support for the following resolutions and frame rates on HDMI inputs have been added.
720/50p, 720/59.94p
1024 x 768/60 Hz (XGA)
1280 x 768/60 Hz (WXGA)
1280 x 1024/60 Hz (SXGA)
1400 x 1050/60 Hz (SXGA+)
1600 x 1200/60 Hz (UXGA)
1920 x 1080/30 Hz (FHD)
3840 x 2160/24 Hz (UHD 4K)
4096 x 2160/24 Hz (DCI 4K)
5 A function for selecting the EDID setting for HDMI inputs has been added.
5 Added SDI input function that determines if source is SDR or HDR, based on SDI Video Payload ID.
Added SDI output parameter to set the Video Payload ID.
5 Parameters for changing the display and color of ROI border shown on the multi-view monitor have been added.
5 In the Input Scaling menu, functions for adjusting ROI size to FHD and resetting parameters have been added.
5 1k stereo test tone output has been added. (L:1k + R:1k)
5 A function for erasing individual stored MEMORY settings has been added.
5 A function for erasing imported still images and captured still images has been added.
Functionality improvements
5 Automatically recall the position of the AUDIO OUTPUT knob at startup and after Factory Reset.
5 Improved processing with 1080/50i and 1080/59.94i inputs.
5 Adjusted synchronization timing when Reference Source is “SDI IN5.”