Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 44)

44
Menu List
Processing 0 [VALUE]
Menu item Value (Bold: default) Explanation
Format
1080p, 2160p(UHD) , 2160p(DCI), 1920x1080,
3840x2160, 4096x2160
This part select V-600UHD’s output (system) format.
Scaling You use the following items to make settings for scaling.
Zoom 10– 100 –1000% This adjusts the zoom ratio.
Correction H -4000– 0 –+4000 This adjusts the horizontal zoom size.
V -4000– 0 –+4000 This adjusts the vertical zoom size.
Position H -4096– 0 –+4096 This adjusts the display position in the horizontal direction.
V -2160– 0 –+2160 This adjusts the display position in the vertical direction.
Cropping You use the following items to make settings for cropping.
Orientation
Upper Left , Upper Right, Lower Left,
Lower Right, Center
This sets the orientation of cropping.
Type
This sets the orientation of cropping.
Full
When the “Zoom” value is “100%,” the entirety of the image is shown on
the output screen.
4:3, 5:4, 16:9
The image will be cropped according to the selected aspect ratio. If the
Zoom value is 100%, the image will be letterboxed.
Manual
The image will be cropped according to the “Manual Width” and “Manual
Height” settings.
Manual Width 0– 512 –4096 This adjusts the horizontal size.
Manual Height 0– 512 –2160 This adjusts the vertical size.
Color Correction You use the following items to perform color correction.
Brightness -64– 0 –+63 This adjusts the brightness.
Contrast -64– 0 –+63 This adjusts the contrast.
Saturation -64– 0 –+63 This adjusts the color saturation.
Red -64– 0 –+63 This adjusts the red level.
Green -64– 0 –+63 This adjusts the green level.
Blue -64– 0 –+63 This adjusts the blue level.
Color Gamut Rec.709 , Rec.2020
This part select output (system) color gamut.
This can be selected if Format is “1080p,” “2160p (UHD),” or “2160p (DCI).”
Dynamic Range SDR , HDR PQ, HDR HLG
This part select output (system) dynamic range.
This can be selected if Format is “1080p,” “2160p (UHD),” or “2160p (DCI).”
Cross-point Assign 0 [VALUE]
Menu item Value
(Bold: default)
Explanation
XPT1 Ch.1 –8, Blank, None
This sets the input channel to be assigned to Cross-point [1]–[8] buttons.
XPT2 Ch.1– 2 –8, Blank, None
XPT3 Ch.1– 3 –8, Blank, None
XPT4 Ch.1– 4 –8, Blank, None
XPT5 Ch.1– 5 –8, Blank, None
XPT6 Ch.1– 6 –8, Blank, None
XPT7 Ch.1– 7 –8, Blank, None
XPT8 Ch.1– 8 , Blank, None