Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 4)

4
Panel Descriptions
Top Panel / Side Panel
1
2 3 4 5
6
7 8
9
10
11
12
13
14
15
16
17
18
19
Side panel Side panel
20 21
Name Explanation
1 USB MEMORY port
This is for connecting a USB flash drive. Use this
to load a still image, save or load settings, or save
a captured still image.
* Never turn off the power or remove the USB
flash drive while the USB flash drive is being
accessed.
2 AUDIO
[INPUT] knob
Adjusts the volume level (digital gain) for AUDIO
IN L/R.
SIG/PEAK indicator Lit green when input is detected at AUDIO IN L/R,
and lit red when the volume is excessive.
[OUTPUT] knob Adjusts the audio output/headphones volume.
Level meter
Indicates the audio output (L/R) volume level.
3 SETUP
[MENU] button
Switches between displaying or hiding the menu.
The menu appears on the multi-view monitor
connected to the MULTI-VIEW connector.
[EXIT] button Returns you to the menu one level higher.
[VALUE] knob
Turning
Selects a menu item or changes a
setting value.
Pressing
Accepts the selected menu item or
applies changes to a setting. It also
executes operations.
4 USER
[1], [2] buttons Execute the functions that are assigned by the
menu settings.
5 MEMORY
[1]–[8] buttons
Save the current settings (such as video settings
and operating panel status) to memory, or recall
settings from memory.
Button functioning is switched according to
whether the [STORE] button is on/off.
[STORE] on (lit)
Saves current settings in
memory.
[STORE] off (unlit)
Recalls settings that are saved
in memory.
[BANK] button When this is turned on (lit), the [1]–[8] buttons
function as bank selection buttons for memories.
[STORE] button When this is turned on (lit), you can save settings
in memories.
Name Explanation
6 PinP / ROI SCALING
[POSITION] stick Adjusts the display position of the input video or
PinP inset screen.
[SIZE] knob Enlarges or reduces the size of the input video or
PinP inset screen.
[PinP1], [PinP2] buttons
(*1)
Select what is controlled by operating the
[POSITION] stick and [SIZE] knob.
[PinP1] button
Lit green PinP1 window
Lit red
Video shown in the PinP1 inset
screen
Lit magenta ROI (input video)
[PinP2] button
Lit green PinP2 window
Lit red
Video shown in the PinP2 inset
screen
Lit magenta ROI (input video)
* When selecting “ROI,” you can adjust the input video selected as the preset video.
7 COMPOSITION (*1)
PinP1 [1], [2] buttons
Turns picture-in-picture video compositing on/
off. The selected button lights up when it is
switched on.
The color of the lit button indicates the output
destination of the compositing results.
Lit green PinP1 composition on
Lit red Final output
Unlit PinP1 composition off
KEY1 [LEVEL] knob
During key compositing, this adjusts the amount
of keying (transparency).
KEY1 [GAIN] knob
During key compositing, this adjusts the degree
of edge blur (the semi-transmissive region) for
keying.
KEY1 [KEY ON] button
Turns key composition on/off.
When on, the KEY1 [KEY ON] button lights up.
The color of the lit button indicates the output
destination of the compositing results.
Lit green KEY1 composition on
Lit red Final output
Unlit KEY1 composition off