Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 48)

48
LAN/RS-232 Command Reference
List of Commands
* When sending a sequence of commands to the V-600UHD from a controller, after each one, be sure to verify that an “ACK” response is returned
before sending the next command.
Video-related operations
Item Sent command Response command Parameter
Select PGM channel stxPGM:a; ACK a: 0 (XPT 1) –7 (XPT 8)
Select PST channel stxPST:a; ACK a: 0 (XPT 1) –7 (XPT 8)
Select channel to send to AUX bus stxAUX:a; ACK a: 0 (XPT 1) –7 (XPT 8)
Select transition pattern stxTRS:a; ACK a: 0 (WIPE 1), 1 (WIPE 2), 2 (WIPE 3), 3 (MIX)
Set video transition time stxTIM:a; ACK a: 0 (0.0 sec) –40 (4.0 sec)
Press the [AUTO] button stxATO; ACK
Press the [CUT] button stxCUT; ACK
Select COMPOSITION type stxCTY:a; ACK
a: 0 (None), 1 (PinP1-1), 2 (PinP1-2), 3 (Key1), 4 (PinP1-1+Key1),
5 (PinP1-2+Key1)
Select DSK type stxDTY:a; ACK
a: 0 (None), 1 (PinP2-1), 2 (PinP2-2), 3 (DSK), 4 (PinP2-1+Key2),
5 (PinP2-2+Key2)
Press the [COMPOSITION] button stxCMP; ACK
Press the [DSK] button stxDSK; ACK
Set output fade on/off stxFDE:a; ACK a: 0 (OFF), 1 (ON)
Set output fade time stxFDT:a; ACK a: 0 (0.0 sec)–100 (10.0 sec)
Audio-related operations
Item Sent command Response command Parameter
Adjust volume level of input audio stxIAL:a,b; ACK
a: 0 (HDMI IN1)–7 (TEST TONE)
b: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
Adjust volume level for master out stxOAL:a; ACK a: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
Adjust volume level for AUX-bus audio stxOAX:a; ACK a: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
System-related operations
Item Sent command Response command Parameter
Call up memory stxMEM:a; ACK a: 0 (1-1)–63 (8-8)
Acquire status of V-600UHD stxACS; ACK
Version information stxVER; stxVER:V-600UHD,a;
a: Version
* The version info is ASCII text strings.
Flow control XON
Flow control XOFF
Commands spontaneously sent from the V-600UHD
Item Sent command Response command Parameter
Error detected stxERR:a;
a: 0 (syntax error) The received command contains an error.
5 (out of range error) An argument of the received command is out of range.
Flow control XON
Flow control XOFF