Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 16)

16
Video Input/Output Settings
Specifying a Reference Clock
You can specify a clock to which operation of the V-600UHD is
referenced (a reference clock).
1 . Select the [MENU] button & “System” &
“Reference Source,” and press the [VALUE] knob.
2 . Use the [VALUE] knob to select the reference clock,
and then press the [VALUE] knob.
Value Explanation
Internal The V-600UHD’s internal clock is used as the reference clock.
SDI IN5
A signal input via an SDI IN5 connector is used as the reference
clock.
When set to “SD IN5,” adjust the following System menu items as
needed.
Value Explanation
Clock Adjust
This adjusts the phase horizontally.
Adjust this when output is horizontally out of sync with the
operation of other devices using the same clock.
Line Adjust
This adjusts the phase vertically.
Adjust this when output is vertically out of sync with or field-
shifted from the operation of other devices using the same
clock.
3 . Press the [MENU] button to quit the menu.