Formatting usb flash drives, Changing cross-point assignments, Returning to the factory settings (factory reset) – Roland V-600UHD 4K HDR Multi-Format Video Switcher User Manual

Page 28: T (p. 28) also changes the or, 600uhd (p. 28), Other operations

Other Operations

Formatting USB Flash Drives

When you’re using a USB flash drive for the first time, it must first be

formatted on the V-600UHD.

NOTE

The V-600UHD does not recognize unformatted USB flash drives.

Operation has been tested for commonly available USB flash

drives, but operation of all USB flash drives is not assured.

Depending on the manufacturer and type of the USB flash drive,

correct operation may not be possible.

Performing formatting causes all data already saved on the USB

flash drive to be deleted. If the flash drive contains necessary data,

back it up onto a computer or elsewhere before formatting the

drive.

Depending on the USB flash drive, recognition of the flash drive

might take some time.

1 .

Select the [MENU] button

“System”

for USB

Memory, select “Format,” and press the [VALUE]

knob.

The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the

[VALUE] knob.

2 .

Select “YES,” and press the [VALUE] knob.

Formatting of the USB flash drive is carried out.

3 .

Press the [MENU] button to quit the menu.

Changing Cross-Point Assignments

You can change the channels assigned to the cross-point [1]–[8]

buttons.

1 .

Select the [MENU] button

“System”

“Cross-point Assign,” and press the [VALUE] knob.

2 .

Select cross-point cross point (from XPT1 to 8),

then use the [VALUE] knob to specify the channel

number (Ch. 1 to 8) to assign to the cross point.

Value

Explanation

Ch.1–8

Assigns an input channel.

Blank

Assigns no input channel. If you press the cross-

point button, a black screen is output.

None

Disables operation of the cross-point button.

3 .

Press the [MENU] button to quit the menu.

Returning to the Factory Settings

(Factory Reset)

You can return the values of settings on the V-600UHD to their

factory defaults.

NOTE

Executing a factory reset causes all values that have been set, settings

saved in memories (p. 26), and still images saved in the unit to be

lost.

1 .

Select the [MENU] button

“System”

“Factory Reset,” and press the [VALUE] knob.

The message “Are you sure?” appears.
If you want to cancel the operation, select “NO,” and press the

[VALUE] knob.

2 .

Select “YES,” and press the [VALUE] knob.

A factory reset is executed.

3 .

Press the [MENU] button to quit the menu.