Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 5)

5
Panel Descriptions
Name Explanation
8 DSK
PinP2 [1], [2] buttons
Turns picture-in-picture video compositing on/
off. The selected button lights up when it is
switched on.
The color of the lit button indicates the output
destination of the compositing results.
Lit green PinP2 composition on
Lit red Final output
Unlit PinP2 composition off
KEY2 [LEVEL] knob During key compositing, this adjusts the amount
of keying (transparency).
KEY2 [GAIN] knob
During key compositing, this adjusts the degree
of edge blur (the semi-transmissive region) for
keying.
KEY2 [KEY ON] button
Turns key composition on/off. When on, the KEY2
[KEY ON] button lights up.
The color of the lit button indicates the output
destination of the compositing results.
Lit green KEY2 composition on
Lit red Final output
Unlit KEY2 composition off
9 AUX/COMPOSITION - DSK
Cross-point [1]–[8]
buttons (*2)
Indicates the status of video input to the cross-
points.
Here you can also select the video that is sent
to the destination specified by the MODE [AUX/
COMPOSITION] button and [DSK/ROI] button.
Unlit Video is not being input.
Lit green Valid video is being input.
Lit red
Video is being sent to AUX.
You can use the [1]–[8] buttons to
change the video that is sent to AUX.
Lit yellow
Video is being sent to COMPOSITION.
You can use the [1]–[8] buttons to
change the video that is sent to
COMPOSITION.
Lit blue
Video is being sent to DSK.
You can use the [1]–[8] buttons to
change the video that is sent to DSK.
10 PGM
Cross-point [1]–[8]
buttons
Selects the final output video. The selected cross-
point button is lit red.
11 PST
Cross-point [1]–[8]
buttons
Selects the preset video (the video to output
next). The selected cross-point button is lit green.
While compositing of the video is in progress it
lit red.
* When the menu is not shown, you can hold
down the [MENU] button and press a PST cross-
point [1]–[8] button to successively switch the
input source setting.
Name Explanation
12 MODE
[AUX/COMPOSITION]
button
[DSK] button (*2)
Selects the destination of the video.
The video selected by the AUX/COMPOSITION -
DSK cross-point [1]–[8] button is sent.
[AUX/COMPOSITION] button
Lit red AUX
Lit yellow COMPOSITION
[DSK] button
Lit blue DSK
13 WIPE PATTERN
[1]–[3] buttons
[MIX] button
Selects the video transition effects. The selected
button lights up.
[1]–[3]
The original video is broken into by the
next video.
[MIX]
The two pictures are blended together
as the video is switched.
14
[CUT] button
[AUTO] button
Makes the preset video (the video to output next)
the final output.
[CUT] The picture switches instantly.
[AUTO]
The picture switches with a transition
effect applied.
15 Video fader
Makes the preset video (the video to output next)
the final output.
16
[OUTPUT FADE]
button
Performs a fade-in or fade-out for the final
output video.
Lit Fade-out
Blink Fade-in/fade-out in progress
Unlit Normal output
17 HDCP indicator
This lights up, blinks, or becomes unlit according
to HDCP (High-bandwidth Digital Content
Protection) settings and the connection status of
HDCP-compatible equipment.
18
[COMPOSITION]
button
If this is on (lit), the composited result
COMPOSITION (PinP1/KEY1) is the final output.
19 [DSK] button
If this is on (lit), the composited result DSK
(PinP2/KEY2) is the final output.
20
Cooling-fan exhaust
port
Expels internal heat to keep temperatures inside
the V-600UHD cool.
NOTE
Do not block the cooling-fan intake and exhaust
ports. Blocking the intake and exhaust ports
might result in a temperature rise inside the
V-600UHD and lead to malfunction due to heat.
21
Cooling-fan intake
port
*1 COMPOSITION (PinP1/KEY1) operation is not possible if the Aux/Composition
setting (p. 43) is “Aux.”
*2 Only AUX can be selected if the Aux/Composition (p. 43) setting is “Aux,”
and only COMPOSITION can be selected if the Aux/Composition setting is
“Composition.”