Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 45)

45
Menu List
Output Fade 0 [VALUE]
Menu item Value (Bold: default) Explanation
Mode
This displays the operation mode of the [OUTPUT FADE] button.
Fade to Background This makes the final video output fade to a monochrome picture (background color).
Output Freeze This freezes the final output video (freeze function).
Time 0– 0.5 –10.0s This sets the fade time.
Curve Linear , Slow In, Cosine, Slow Out This sets the fade curve for fade to background.
Color Setting You use the following items to set the background color.
Red 0– 16 –255 This sets the red level.
Green 0– 16 –255 This sets the green level.
Blue 0– 16 –255 This sets the blue level.
Multi-view 0 [VALUE]
Menu item Value
(Bold: default)
Explanation
Layout PGM
Upper Left, Upper Right ,
Lower Left, Lower Right
This sets the position of PGM section in multi-view monitor.
Label PGM PGM
Pressing the [VALUE] knob displays the label entry screen.
Here you can edit the label name shown in the multi-view monitor.
To confirm the label name, select “OK” and press the [VALUE] knob.
PVW PVW
XPT1 CH.1
XPT2 CH.2
XPT3 CH.3
XPT4 CH.4
XPT5 CH.5
XPT6 CH.6
XPT7 CH.7
XPT8 CH.8
ROI Border
This specifies whether the ROI border is shown.
Shared Ch A border is shown only for the channel specified as “Shared Ch.”
All On A border is shown for all channels.
Off A border is not shown.
Color
White , Red, Green, Blue, Cyan,
Magenta, Yellow, Black
Specifies the color of the ROI border.
Output Capture 0 [VALUE]
Menu item Value
(Bold: default)
Explanation
Still Image Memory 1– 8
This selects the save-destination memory number for the captured still image.
* Memory numbers that contain a still image are indicated by a “ ” symbol.
Source Bus
PGM , PVW This specifies the bus of the video source used for still image capture.
Execute This captures a still image from the output video.
GPI 0 [VALUE]
Menu item Value
(Bold: default)
Explanation
GPI1–8
This sets the function assigned to the GPI channel. When a control signal is input from an external source, the assigned
function is executed.
* The GPI trigger is fixed at the trailing edge (low: On). For details, refer to “Inputting a Control Signal” (p. 49).
None No function is assigned.
PGM XPT1–8 This switches the final output video.
PST XPT1–8 This switches the preset video (the video to be output next).
Memory Load1-1–8 This loads a memory (Bank 1 only).
DSK SRC Sel1–8 During DSK compositing, this switches the cross-point of the overlaid logo or image.