Roland V-600UHD 4K HDR Multi-Format Video Switcher - Manual (Page 26)

26
Other Operations
Saving a memory
NOTE
5 When the System menu item “Memory Protect” is set to “On,”
settings cannot be saved to a memory.
5 The following settings are not saved in memory.
– The state of the operating panel’s [OUTPUT FADE] button
– The items of the Output, USER, and System menus
1 . Press the [STORE] button (lit red) to enable saving
settings to a memory.
2 . Press the [BANK] button (lit green), then press the
MEMORY button for the bank number where you
want to save the settings.
When you press the [BANK] button to make it light, the MEMORY
button of the currently selected bank number is lit green.
When the bank is switched, the [BANK] button and the MEMORY
button go dark.
3 . Press the MEMORY button for the number whose
setting you want to save.
Button illumination color when selecting memories
Lit light blue Current blue
Lit blue Memory in which current settings are saved
Unlit Memory in which no settings are saved
The [STORE] button blinks, the current settings are saved, and
then the [STORE] button goes dark.
MEMO
If you don’t want to change the save-destination bank, steps 2 are
not required.
Recalling a memory
1 . Press the [BANK] button (lit green), then press
the MEMORY button for the bank number whose
settings you want to recall.
2 . Press the MEMORY button for the number whose
setting you want to recall.
When switching banks, the MEMORY buttons of numbers
in which settings are saved will blink blue until a memory
is recalled.
The memory is recalled. The MEMORY button of the current
memory is lit light blue.
MEMO
5 If you don’t want to change the recall-source bank, steps 1 are not
required.
5 The top screen of the menu shows the “bank number–memory
number” of the currently selected memory.
Saving/Recalling Settings (Memory)
You can save video settings, the state of the operation panel, and other current settings in memory and call them up for use when needed.
The V-600UHD has 8 internal banks for saving settings in memory.
You can save settings in 8 memories in each bank, letting you use up to 64 memories for saving.
About the Last Memory function
When you use the Last Memory function, the current settings are automatically saved when you exit a menu or change the setting. To use the
Last Memory function, go to the System menu and set “Auto Memory” to “ON.”