Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 97)

97
Menu List
LAYER SETTINGS
Menu item Value (bold text: default value) Explanation
PROGRAM
PinP & KEY 1–2 DISABLE, ENABLE Sets whether each layer is displayed (ENABLE) or hidden (DISABLE) in the final output
video. DSK DISABLE, ENABLE
SUB PROGRAM
PinP & KEY 1–2 DISABLE, ENABLE
Sets whether each layer is displayed (ENABLE) or hidden (DISABLE) in the SUB PROGRAM
bus video. DSK DISABLE, ENABLE
AUX
PinP & KEY 1–2 OFF , PGM SYNC, ON Sets whether each layer in the AUX bus video is shown (ON), synced with PGM (PGM SYNC)
or hidden (OFF). DSK OFF , PGM SYNC, ON
VIDEO OUTPUT ASSIGN
Menu item Value (bold text: default value) Explanation
VIDEO OUT 1–3
Specifies the video bus that is assigned to the VIDEO OUT 1–3 connectors.
PROGRAM Final output video. This is the default setting for “VIDEO OUT 1”.
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video. This is the default setting for “VIDEO OUT 2”.
AUX AUX bus video
MULTI-VIEW Multi-view. This is the default setting for “VIDEO OUT 3”.
STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
USB OUT
Specifies the video bus that is assigned to the USB STREAM connector.
PROGRAM Final output video.
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video.
AUX AUX bus video
MULTI-VIEW Multi-view.
STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
STREAM/RECORD
Specifies the video bus that is assigned to the DIRECT STREAM port.
PROGRAM Final output video.
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video.
AUX AUX bus video
MULTI-VIEW Multi-view.
STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
LCD MONITOR
Specifies the video bus to which this unit’s display is assigned.
PROGRAM
Final output video.
SUB PROGRAM SUB PROGRAM bus video
PREVIEW Preview output video.
AUX AUX bus video
MULTI-VIEW Multi-view.
STILL-VIEW Still images loaded into the unit (shown as 16 separate sections on the screen)
AUDIO LEVEL Level meters for each channel
AUX SOURCE
VIDEO 1–6, STILL 1–16, V.PLAYER,
INPUT 1 –16
Selects the video that is sent to the AUX bus.
When the mode is “AUX”,
you can also use the VIDEO SWITCHER [1]–[6] buttons to select the video signal that’s sent
to the AUX bus.