Streaming/capturing video directly, Network requirements, Points to be aware of when livestreaming – Roland VR-6HD Direct Streaming AV Mixer User Manual
Page 58: Turning the livestream on/off, Turning video and audio recording on/off, Live streaming
58
Live Streaming
Streaming/Capturing Video Directly
Network Requirements
Router
Internet
Platform
YouTube live
Facebook Live
Twitch
LAN
(DIRECT STREAM)
Internet connection, including DNS server settings
¹
To access the Internet, the IP address, subnet mask and default gateway
must be configured.
¹
To access the server hosting the streaming service, you must connect
to the DNS (Domain Name System) server, which converts the server’s
domain name and IP address.
* The above settings are usually retrieved from the DHCP server and
assigned.
Continuous TCP communications
To broadcast the livestream via the RTMP or RTMPS protocol over TCP,
continuous communication without interruptions or restrictions between
devices is required.
HTTPS connection to an Internet server
To configure the livestream for a Web app, you must have an HTTPS
connection to an Internet server.
Points to Be Aware of When Livestreaming
Set the appropriate V.BITRATE (p. 125) to match the speed of your
Internet connection.
[MENU] button
Ó
“STREAM/RECORD”
Ó
“V.BITRATE”
V.BITRATE is a target bit rate that’s used when compressing (encoding)
video.
For complex video sequences and the like, the video may be livestreamed
at a bit rate of up to around 1.5 times the value that’s set.
We recommend that you test the speed of your Internet connection to
ensure that a bandwidth of around twice the V.BITRATE value is available
before beginning the livestream.
Starting/Stopping the Livestream, Audio or
Video Recording
The livestream, audio recording and video recording on the VR-6HD
start and stop all at the same time, and cannot be started or stopped
separately.
* You can separately set whether to livestream, record audio or video.
Turning Livestreaming, Audio and Video
Recording ON/OFF
Turning the livestream on/off
1 .
[MENU] button
Ó
select “STREAM/RECORD”, and press the
[VALUE] knob.
The streaming/recording screen appears.
2 .
Touch
The Record/Stream setup screen appears.
3 .
Touch either SERVICE 1 or SERVICE 2 to select the platform
for streaming.
Select “OFF” when you’re not streaming.
Turning video and audio recording on/off
4 .
Touch the page tab in the top part of the screen to select
page 2.
5 .
Touch “VIDEO REC” and “AUDIO REC” to turn them on/off.