Outputting a tally signal, Outputting a control signal, Assigning the gpos – Roland VR-6HD Direct Streaming AV Mixer User Manual
Page 91: Other functions
91
Other Functions
Outputting a Tally Signal
Pins 1–16 of the TALLY/GPIO connector can be used to output a tally.
A tally signal is output from the connector pins whenever a VIDEO
SWITCHER button is selected.
1 .
[MENU] button
Ó
“REMOTE”
Ó
“TALLY/GPO”
Ó
select
“TALLY/GPO 1”–”TALLY/GPO 16”, and press the [VALUE]
knob.
2 .
Use the [VALUE] knob to select the tally signal assigned to
the connector pins and then press the [VALUE] knob.
Value
Explanation
PGM VIDEO IN 1–6
Video for which the final output is VIDEO
IN 1–6
PGM STILL 1–16
The final output is still images 1–16.
PGM VIDEO PLAYER
Video for which the final output is from the
video player
PGM INPUT 1–6
Use the VIDEO SWITCHER [1]–[6] buttons to
select the final output video.
PST VIDEO IN 1–6
Video for which the preview output is VIDEO
IN 1–6.
PST STILL 1–16
The preview output is still images 1–16.
PST VIDEO PLAYER
Video for which the preview output is from
the video player
PST INPUT 1–6
Use the VIDEO SWITCHER [1]–[6] buttons to
select the preview output video.
3 .
Press the [MENU] button to close the menu.
MEMO
Use a settings template to change the assignments for the connector
pins all at once.
Select a template from “TEMPLATE” in the TALLY/GPO menu and then
press the [VALUE] knob to apply the settings.
Outputting a Control Signal
You can use connector pins 1–16 of the TALLY/GPIO connector as GPOs to
output control signals.
Assigning the GPOs
You can assign pins 1–16 of the TALLY/GPIO connector to the GPOs (1–16)
in order to output control signals.
1 .
[MENU] button
Ó
“REMOTE”
Ó
“TALLY/GPO”
Ó
select
“TALLY/GPO 1”–”TALLY/GPO 16”, and press the [VALUE]
knob.
2 .
Use the [VALUE] knob to select one of “GPO 1”–“GPO 16”,
and press the [VALUE] knob.
3 .
Press the [MENU] button to close the menu.
MEMO
Use a settings template to change the assignments for the connector
pins all at once.
Select a template from “TEMPLATE” in the TALLY/GPO menu and then
press the [VALUE] knob to apply the settings.
Outputting a control signal
Control signals are outputted when you operate a USER button,
footswitch or other control to which a GPO output function has been
assigned.
Operating the USER buttons on the dashboard
The USER buttons light up while control signals are being output.
Using a footswitch
Inputting an external control signal (GPI)