Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 63)

63
Live Streaming
Tethering
You can connect your smartphone to this unit and use it for
tethering.
USB HOST (Type A)
iPhone:
1 . Use the Lightning to USB-A cable included with your iPhone
to connect to the USB HOST port of the VR-6HD.
2 . On your iPhone, select “Settings” Ó “Personal Hotspot”, and
turn “Allow Other to Join” on.
3 . When you see the message, “Trust this Computer?”, tap
“Trust”.
4 . If you see the message “Enter Device Passcode to Trust This
Computer”, enter your passcode.
5 . Touch at the top right-hand corner of
the streaming/recording setup screen.
The NETWORK screen appears.
6 . Touch and select “TETHERING”
7 . Touch .
8 . Go back to the streaming/recording setup screen.
Once the NETWORK display in the status area changes from
“TETHERING: ---” to “TETHERING: UP”, you can use the mobile network
connection of your iPhone.
TETHERING: UP
9 . To stop tethering, return to the NETWORK screen and touch
.
Android devices:
NOTE
The method of operation differs depending on the smartphone
model. Check the owner’s manual for your device for details.
1 . Connect the USB HOST port of the VR-6HD to your
smartphone with a USB cable.
A notification is shown at the top of your smartphone screen.
2 . On your smartphone, select “Settings” Ó “Network and
Internet” Ó “Hotspot and tethering”.
3 . Activate “USB tethering”.
4 . Touch at the top right-hand corner of
the streaming/recording setup screen.
The NETWORK screen appears.
5 . Touch and select “TETHERING”
6 . Touch .
7 . Go back to the streaming/recording setup screen.
Once the NETWORK display in the status area changes from
“TETHERING: ---” to “TETHERING: UP”, you can use the mobile network
connection of your smartphone.
TETHERING: UP
8 . To stop tethering, return to the NETWORK screen and touch
.
MEMO
You can also make the tethering start/stop from the menu.
[MENU] button
Ó “NETWORK” Ó select “TETHERING”, and press the
[VALUE] knob.