Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 47)

47
Audio Operations
Applying Reverb
Adds reverberation to the sound.
Adjusting how much reverb to send
Parameter Explanation
REVERB SEND Adjusts the amount of audio sent to reverb.
Adjusting how much reverb is returned
* On the audio output setup screen, adjust how much reverb is
returned.
1 . [MENU] button
Ó
“AUDIO”
Ó
“OUTPUT”
Ó
select “MAIN
BUS”, and press the [VALUE] knob.
The setup screen appears.
2 . Press the AUDIO EFFECT [REVERB] button to turn on (lit).
REVERB
Reverb turns on.
3 . Touch the screen to access the settings.
Parameter Explanation
LEVEL
Specifies the amount of sound that is returned from
the reverb (return level). This adjusts the depth of the
overall reverb.
TYPE
Specifies the reverb type.
ROOM: Produces the natural-sounding
reverberation of a room.
HALL: Produces the reverberation that is typical of
a performance in a concert hall.
SIZE
Specifies the size of the room. The larger the value, the
longer the reverb time.
REVERB
RETURN
LEVEL
Adjusts the return level of the reverb.
4 . Press the lit [SETUP] button to close the setup screen.