Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 96)

96
1: VIDEO
VIDEO INPUT
Menu item Value (bold text: default value) Explanation
VIDEO IN 1–6 Adjusts the video that is input from the VIDEO IN 1–6 connectors.
INPUT STATUS Enter Displays information about the incoming video (format, size, etc.).
FLICKER FILTER OFF , ON When this is “ON”, flickering is reduced.
FLIP H OFF , ON When this is “ON”, the video is input with left and right flipped.
FLIP V OFF , ON When this is “ON”, the video is input with top and bottom flipped.
EDID (*1)
INTERNAL
SVGA (800 x 600)
XGA (1024 x 768)
WXGA (1280 x 800)
FWXGA (1366 x 768)
SXGA (1280 x 1024)
SXGA+ (1400 x 1050)
UXGA (1600 x 1200)
WUXGA (1920 x 1200)
720p, 1080i, 1080p
Specifies the input format (EDID).
When this is “INTERNAL”, EDID information for all formats that can be input to the VR-6HD
will be transmitted.
What is EDID?
EDID is data that is transmitted from the VR-6HD to the source device when the VR-6HD is
connected to a source device. EDID contains data such as the formats that can be input to
the VR-6HD (resolution, color space, color depth) and audio information.
Based on the EDID information that the source device receives, it will output the most
appropriate video format to the VR-6HD.
ZOOM 10.0– 100 .0 –1000.0% (*2) Adjusts the zoom ratio.
SCALING TYPE
Specifies the scaling type.
FULL
Always displays the picture expanded to full screen, irrespective of the aspect ratio of the
input video.
LETTERBOX
Enlarges or reduces the incoming video to a full-screen view while keeping the aspect ratio
unchanged.
CROP
Enlarges or reduces the incoming video so that the output picture has no blank margins
while keeping the aspect ratio unchanged. Video extending beyond the borders is cut off.
DOT BY DOT Performs no scaling.
MANUAL Scale according to the “MANUAL SIZE H” and “MANUAL SIZE V” settings below.
MANUAL SIZE H (*3) -2000– 0 –2000 (*2) Adjusts the horizontal size.
MANUAL SIZE V (*3) -2000– 0 –2000 (*2) Adjusts the vertical size.
POSITION H -1920– 0 –1920 Adjusts the position in the horizontal direction.
POSITION V -1200– 0 –1200 Adjusts the position in the vertical direction.
BRIGHTNESS -32– 0 –31 Adjusts the brightness.
CONTRAST -32– 0 –31 Adjusts the contrast.
SATURATION -32– 0 –31 Adjusts the saturation.
RED -64– 0 –63 Adjusts the red level.
GREEN -64– 0 –63 Adjusts the green level.
BLUE -64– 0 –63 Adjusts the blue level.
VIDEO PLAYER Adjusts the video that is input from the video player.
FLIP H OFF , ON When this is “ON”, the video is input with left and right flipped.
FLIP V OFF , ON When this is “ON”, the video is input with top and bottom flipped.
(*1) A change in the setting is not applied until you press the [VALUE] knob to confirm.
(*2) The valid range of setting values depends on conditions such as the input/output format.
(*3) This can be set if “SCALING TYPE” Is “MANUAL”.
VIDEO INPUT ASSIGN
Menu item Value (bold text: default value) Explanation
INPUT 1–6
VIDEO 1–6, STILL 1–16, V.PLAYER,
N/A
The default values are as follows.
INPUT 1:
VIDEO 1
INPUT 2: VIDEO 2
INPUT 3: VIDEO 3
INPUT 4: VIDEO 4
INPUT 5: VIDEO 5
INPUT 6: VIDEO 6
Sets the video source (input video and still images) to assign to the VIDEO SWITCHER [1]–
[6] buttons.
Menu List