Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 72)

72
Other Functions
Copying Macro Settings
Here’s how to copy the settings from one macro to another.
1 . [MENU] button
Ó
“MEMORY/MACRO/SEQ”
Ó
select
“MACRO”, and press the [VALUE] knob.
The macro screen appears.
2 . Long-press the area corresponding to the copy source
macro number.
Long-press
Switch between pages
A popup menu appears.
3 . Touch .
A cursor appears, which is used to select the copy destination.
4 . Use the [VALUE] knob to select the copy destination macro
number, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The macro settings are copied.
Swapping the Macro Settings
Here’s how to swap settings between macros.
1 . [MENU] button
Ó
“MEMORY/MACRO/SEQ”
Ó
select
“MACRO”, and press the [VALUE] knob.
The macro screen appears.
2 . Long-press the area corresponding to the swap source
macro number.
Long-press
Switch between pages
A popup menu appears.
3 . Touch .
A cursor appears, which is used to select the swap destination.
4 . Use the [VALUE] knob to select the copy destination macro
number, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
This swaps the settings of the macros.