Roland VR-6HD Direct Streaming AV Mixer - Manual (Page 136)

136
Menu List
12: NETWORK
Menu item
Value (bold text: default
value)
Explanation
NETWORK INFORMATION
ENTER Displays the following information.
Item Explanation
CONNECTION Connection status
IP ADDRESS IP address
SUBNET MASK Subnet mask.
DEFAULT GATEWAY Default gateway
DNS SERVER DNS server
PRIORITY LAN , TETHERING
Sets whether to prioritize the LAN connection or your smartphone tethering when
streaming.
CONFIGURE
Selects how settings are made for the IP address, subnet mask, and default gateway.
MANUAL
This is to be configured manually.
USING DHCP
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
IP ADDRESS (*1) –––.–––.–––.––– Specifies the IP address as appropriate for the network to which the unit is connected.
SUBNET MASK (*1) –––.–––.–––.––– Specifies the subnet mask as appropriate for the network to which the unit is connected.
DEFAULT GATEWAY (*1) –––.–––.–––.––– Specifies the default gateway as appropriate for the network to which the unit is connected.
DNS SERVER (*1) –––.–––.–––.–––
Specifies the DNS server address as appropriate for the network to which the unit is
connected.
TETHERING START , STOP Starts/stops tethering with your smartphone.
2D CODE FOR SMART TALLY ENTER
QR code for accessing the Smart Tally settings screen (Web)
* Note that the QR code is not shown if the VR-6HD is disconnected from the network.
NETWORK PASSWORD ENTER
Displays the NETWORK PASSWORD screen.
Set the necessary password for network connection, using four characters.
Show password
Password not set – – – –
Password set
* Input the password that’s set here when connecting a computer or other device on the same network
to access the VR-6HD.
MAC ADDRESS ––:––:––:––:––:–– Shows the MAC address of the VR-6HD.
(*1) This can be set if “CONFIGURE” is “MANUAL”.
13: SD CARD/USB MEMORY
Menu item
Value (bold text: default
value)
Explanation
SD CARD These are the SD card-related parameters.
EJECT EXEC Safely ejects and allows you to remove the SD card.
FORMAT EXEC Formats the SD card.
SPEED TEST EXEC Measures the data write speed to the SD card.
USB MEMORY These are the USB flash drive-related parameters.
EJECT EXEC Safely ejects and allows you to remove the USB flash drive.
FORMAT EXEC Formats the USB flash drive.
SPEED TEST EXEC Measures the data write speed to the USB flash drive.
RESTORE ALL SETTINGS ENTER
Shows a list of the setting files (.VR6) that are on the USB flash drive.
You can select a setting file and restore the settings into the unit. The current settings are
overwritten.
BACKUP ALL SETTINGS ENTER
Shows a list of the setting files (.VR6) that are on the USB flash drive.
You can select the settings file used to back up the current settings to the USB flash drive.
* Some settings are not saved to the file, such as the “TEST PATTERN” and “TEST TONE” settings in the
SYSTEM menu.