Label id, Label id: pre-loaded sets, Default – Datalogic QuickScan Lite QW2100 User Manual
Page 80
Data Editing
70
QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex
0x01-0xFF), used to identify a bar code (symbology) type. It can be appended previous to or fol-
lowing the transmitted bar code data depending upon how this option is enabled. This feature
provides options for configuring custom Label IDs as a pre-loaded set (see
) or individually per symbology (see
). If you wish to program the reader to always include an indus-
try standard label identifier for ALL symbology types, see the previous feature
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. shows the USA set and the EU set. See
Label ID: Pre-loaded Sets on page 262
for more information concerning the pre-loaded
sets that are provided.
CAUTION
When changing from one Label ID set to another, all other reader con-
figuration settings, including the host interface type, will be erased
and set to the factory defaults. Any custom configuration or custom
defaults will be lost.
$AE
Label ID Pre-loaded Set = USA Set
$Ae
Label ID Pre-loaded Set = EU Set
DEFAULT