Datalogic 2 of 5 set length 2, Default, Datalogic 2 of 5 — cont – Datalogic QuickScan Lite QW2100 User Manual
Page 178
Symbologies
168
QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Datalogic 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
Datalogic 2 of 5 Length Control
.
Length 2 is the maximum label length if in
Mode, or the second fixed length
if in
Mode. The length includes the bar code’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
for more detailed programming
instructions.
$CD2L2
Select Datalogic 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters