Datalogic QuickScan Lite QW2100 - Manual (Page 191)

Codabar
Product Reference Guide 181
ENTER/EXIT PROGRAMMING MODE
Codabar — cont.
Codabar Set Length 2
This feature specifies one of the bar code lengths for Codabar Length Control . Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. The length includes the bar code’s start, stop, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
Set Length 2 on page 269
for more detailed programming
instructions.
$CCBL2
Select CodabarLength 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT 50 = Length 2 is 50 Characters